Eltako 61200603 Blinds controller Blue
Actuator 230V Motor isolating relay, 1 + 1 NO non-potential-free 10A/250V AC, for a 230V AC motor. Stand-by loss only 0.4 watts. For panel mounting. 45mm long, 45mm wide, 32mm deep. The latest hybrid technology combines the advantages of wear-free electronic...
Eltako 70000008 Base load
A base load is used if loads cannot be recognized due to their capacity, but should cause the mains voltage to be switched on. Basic loads must always be operated in parallel with the associated consumer and switched off with the same. Higher standby...
Eltako 91100030 Impulse changeover switch Surface-mount 230 V
This is a switching relay, which is suitable for installation and AP-mounting. In addition, this is a manual operation and a switching position indicator. The switching relay is 26 mm wide and 32 mm deep and 26mm wide. The duty cycle is 100%, the control...
Eltako 91100411 Relay Nominal voltage: 12 V Switching current (max.): 8 A 1 maker 1 pc(s)
This is a switching relay, which is suitable for installation and AP-mounting. In addition, this is a manual operation and a switching position indicator. The switching relay is 26 mm wide and 32 mm deep and 26mm wide. The duty cycle is 100%, the control...
Eltako BZR12DDX-UC Service hours counter
Digitally adjustable operating hours pulse counter with alarm relay and reset. Standby loss only 0.05 to 0.5 watts. To do this, simply connect the N conductor to the clamp (N) and L to 1 (L). This results in an additional standby loss of only 0.1 watt....
Eltako Corded discharged air control ETR61NP-230V+FK 2500 W
Cut relay 230V with window contact FK. 1 NO contact non-potential-free 10A/250V AC. With window contact. Stand-by loss only 0.5 watts. For panel mounting. 45mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free...
Eltako DSZ14DRS-3x80A MID Electricity meter (3-phase) Digital 80 A MID-approved: Yes 1 pc(s)
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. RS485-Bus radio three-phase meter. Maximum current 3x80A, standby loss only...
Eltako DSZ15D-3x80A MID Electricity meter (3-phase) Digital 80 A MID-approved: Yes 1 pc(s)
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. Maximum current 3x80A, standby loss of only 0.5 watts per path. Series installation...
Eltako DSZ15DE-3x80A Electricity meter (3-phase) Digital 80 A 1 pc(s)
Maximum current 3x80A, standby loss of only 0.5 watts per path. Series installation device for mounting on DIN-EN 60715 TH35 mounting rail. 4 division units = 70mm wide, 58mm deep. Accuracy class B (1%). With S0 interface. The direct measuring three-phase...
Eltako DSZ15DM-3x80A MID Electricity meter (3-phase) Digital 80 A MID-approved: Yes 1 pc(s)
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. M-Bus three-phase meter. Maximum current 3x80A, standby loss of only 0.5 watts...