Joy-it sbc-ssr01 Relay board 1 pc(s)
This 4-channel solid-state relay is suitable for switching alternating voltage. It has galvanic isolation through integrated optocouplers and switching of the load is done with transistors, which means it has a much longer service life than mechanical...
![Image of Joy-it sbc-ttl Jumper cable Raspberry Pi [1x USB 2.0 connector A - 4x Wire jumper socket] 20.00 cm](https://images2.productserve.com/?w=200&h=200&bg=white&trim=5&t=letterbox&url=ssl%3Aasset.conrad.com%2Fmedia10%2Fisa%2F160267%2Fc1%2F-%2Fen%2F002149077PI00%2Fimage%3Fx%3D400%26y%3D400%26ex%3D400%26ey%3D400%26align%3Dcenter%26format%3Djpg&feedId=17975&k=f1)
Joy-it sbc-ttl Jumper cable Raspberry Pi [1x USB 2.0 connector A - 4x Wire jumper socket] 20.00 cm
Since this USB-TTL interface is based on the widespread CH340G chip, it is usually ready for operation without additional driver installation. In addition, the configuration with jumpers can switch between 3.3V and 5V (both supply voltage and logic level).This...
Joy-it SBC-USR-ES1 Ethernet shield Suitable for (single board PCs) Raspberry Pi®, Arduino 1 pc(s)
With this SPI Ethernet interface converter, you can add an Ethernet interface to your Arduino, Raspberry Pi Pico and similar boards. Furthermore, due to its design, it can be perfectly integrated into a wide variety of projects.This text is machine translated.
Joy-it SBC-WL-Controller Arduino add-on PCB Black Suitable for (single board PCs) Arduino 1 pc(s)
This Controller-Pad works with 2.4 GHZ and has a range of up to 8 meters. The wireless receiver has led signals micro-controller such as the Arduino assembled. Here it is, among other things, self-built robot control. It has 11 buttons, 1 digital control...
Joy-it SBC-ZDE Joystick module 1 pc(s)
The Zero Delay Encoder is the easiest way to do thisConnect your own arcade joysticks and buttons and withTo the Raspberry, PC or other devices. Create your ownController and enjoy your games without any loss or control your robot project according to...
Joy-it SEN-BME680 Sensor module 1 pc(s)
The Bosch Sensortec BME680 is the new, compact transfer sensor with integrated sensors for humidity, pressure, temperature and air quality.The digital interfaces I2C and SPI also enable a simple and fast reading of the measured values.This text is machine...
Joy-it SEN-CCS811V1 Sensor module 1 pc(s)
The CCS811 is a gas sensor that monitors air quality and can measure a large number of volatile organic compounds (VOCs).The data of the sensor can be converted to a total value of volatile organic compounds (TVOC) or to a carbon dioxide equivalent level...
Joy-it sen-color Arduino add-on PCB Black Suitable for (single board PCs) Arduino 1 pc(s)
Color sensor/ColorimeterWith this module, it is possible the composition (red, green, and blue component) of colors to determineThe module on its outputs a signal, which in its frequency in the table with the intensity of the measured color is setThis...
Joy-it SEN-DHT22 Temperature/RH sensor 1 pc(s) Compatible with (development kits): Arduino, Asus, ASUS Tinker Board, Banana Pi, BeagleBoard, Raspberry Pi
This sensor uses a capacitive humidity sensor and thermistor to measure the temperature and humidity of the surrounding air. The data is output via a digital signal.The sensor is suitable for all Raspberry or Arduinobased systems thanks to its variable...
Joy-it SEN-GP2Y1014AU Sensor 1 pc(s)
The GP2Y1014AU is an optical sensor for detecting dust particles.The light reflected by the dust is detected by an integrated infrared diode and a photo transistor and can thus be determined in an analogueue value.This text is machine translated.