FWS61-24V DC Eltako Transmitter unit Flush mount Max. range (open field) 30 m
Wireless weather data transmission module for the seven weather data of the multi-sensor MS. With inner antenna. Standby loss of only 0.3 watts. For panel mounting. 45mm long, 45mm wide, 18mm deep. Supply voltage 24V DC from the 33mm low switched-mode...
FWZ12-65A Eltako Electricity meter (AC)
Wireless AC meter. Standby loss of only 0.5 watt. DIN-EN 60715 TH35 DIN rail mounting device. 1 division unit = 18 mm wide, 58 mm deep. This alternating current counter measures the active energy on the basis of the current flowing between the input and...
FWZ14-65A Eltako Electricity meter (AC) DIN rail Max. range (open field) 30 m
RS485-Bus radio AC meter, maximum current 65A, standby loss only 0.5 watts. Series installation device for mounting on DIN-EN 60715 TH35 mounting rail. 1 division unit = 18mm wide, 58mm deep. Accuracy class B (1%). With RS485 interface. Connection to...
HP+BF Eltako Fastener set
Mounting plate with mounting frame for EnOcean module PTM.., use e.g. with FT55, F2T55E, F4T55E and FS55E.This text is machine translated.
Impulse changeover switch DIN rail Eltako EGS12Z2-UC 4 makers 230 V 2 A 500 W 1 pc(s)
UC actuator Surge group switch for central control for two 230V motors. Stand-by loss only 0.05 - 0.9 watt. The control voltage at terminals A3 to A8 must have the same potential. This surge group switch changes the commands of the sensor relays or of...
Impulse changeover switch DIN rail Eltako EGS12Z-UC 2 makers 230 V 2 A 1 pc(s)
UC actuator Surge group switch for central control for 1 motor or for motor relays. Standby loss only 0.05 to 0.4 watts. This surge group switch changes the commands of the sensor relays or of switches and buttons and switches a motor, motor isolating...
Impulse changeover switch DIN rail Eltako ES12-110 1 maker, 1 breaker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current.
Impulse changeover switch DIN rail Eltako ES12-200 2 makers 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current. Switching power max. 20 A/230 V via both the contacts.
Impulse changeover switch DIN rail Eltako ES12DX-UC 1 maker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current.
Impulse changeover switch DIN rail Eltako ES12Z-110 1 maker, 1 breaker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no power consumption in standby. Control with 8 - 230 V/UC, additional control inputs for central on and central off with 8 - 230 V/UC (galvanically separated). Glow lamp current max. 50 mA starting from 100...