Joy-it MB-CASE02 Housing MB-Case02
This casing for the BBC micro:bit V2 is ideal for all makers and hobbyists. It protects your micro:bit while experimenting and tinkering, while all connections and buttons are further accessible from all sides.It is also compatible with the BBC micro:bit...
Joy-it mb-conn01 Prototyping board Joy-IT
This breakout board makes all contacts of the Micro:Bit easily accessible as pin socket. In addition, it has a regulated power supply, which makes it possible to operate the breakout board with 5-9V. Through the accompanying Bread-board this Breakout-Board...
Joy-it Meter
This extremely compact mini voltmeter for a voltage range of 3 -30 volts has a 3-digit 7-segment display (0.36 inch). The measured value is displayed exactly to one or 2 decimal places and updated every 0.3 seconds. The minimum power consumption of less...
Joy-it MPU6050 Acceleration sensor 1 pc(s) Compatible with (development kits): BBC micro:bit, Arduino, Raspberry Pi, Rock Pi, Banana Pi, C-Control, Calliope
The MPU 6050 operates at a voltage of 3.3 to 5 volts (DC). The integrated I2C interface makes it compatible with all SBC and controllers such as Raspberry, Arduino, etc. Please refer to the data sheet or technical details for the exact technical details.This...
Joy-it Multi-touch display 1024 x 600 Pixel (W x H x D) 165 x 13 x 124 mm
This 7" (17.78 cm) touch-display impresses through its variety of different application possibilities.The display can be connected via HDMI as well as via VGA.It has a 3.5 mm audio connection and a 4-pin JST socket to which headphones or 2x 2 W / 5 Ω...
Joy-it neu Breadboard developing kit 1 pc(s)
This breadboard set is suitable for all common single board computers. It makes creating and trying your own circuits andElectronic experiments very comfortable and safe. In addition to a breadboard ( 2.54mm pitch, 830 contact points, 200 forSuitable...
Joy-it NodeMCU V2 LUA Development board Node MCU ESP8266 WiFi Modul
The NodeMCU V2 is a ESP 8266-based development kit with open source firmware. With just a few lua-skriptzeilen you can design your own IoT project with the module.2 x 2.54 mm 15-pin header with the LED:- 10 GPIO as PWM, I2C and 1-wire can be usedSPI-UARTADCThis...
Joy-it PoE PC Raspberry Pi® 4 B 4 GB 4 x 1.5 GHz
This Pi PC is based on the Raspberry PI4-4GB and can be used very flexibly. Due to the PoE Hat integrated in the housing, operation is only possible via LAN. No additional power supply and no outlet is needed. A 32 GB memory card (without software) and...
Joy-it PoStep25-256 Stepper motor drive 2.5 A Screw terminals
The PoStep25-256 is a high-performance capable, cost-effective stepper motor driver for implementing an intelligent stepper motor control - Smooth tune. The driver has advanced architecture and surface mounting technology to achieve exceptional power...