RUKO 108240F Tap drill bit set 40 mm TiAIN 1 pc(s)
Diameter 40 mm. Cutting depth: 30 mm - core drill bits made of high-performance high-speed steel with titanium-aluminum-nitride coating. The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3,000 HV/microhardness and...
RUKO 108304 Ejector pin 6.4 mm 1 pc(s)
Additional technical information: For core drill bits: 30 mm cutting depth; Drill hole diameter: 6.4 mm; Material (drill bit): HSS; Total length: 77.0 mm; Working length: 30.0 mm
RUKO 108305 Ejector pin 6.4 mm 1 pc(s)
Additional technical information: For core drill bits: 55 mm cutting depth; Drill hole diameter: 6.4 mm; Material (drill bit): HSS; Total length: 102.0 mm; Working length: 55.0 mm
RUKO 108518 Tap drill bit set 18 mm 1 pc(s)
Can be used in all column and magnetic stand drills with Morse cone in conjunction with RUKO recording holder No. 108 302 / 108 303, the RUKO EasyLock No. 108 312 / 108 313.This text is machine translated.
RUKO 108820 Tap drill bit set 7-piece 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm 1 Set
7-piece core drill bit set with Weldon shank (3/4")6 core drills with Weldon shank (3/4"") Ø 12.0 - 14.0 - 16.0 - 18.0 - 20.0 - 22.0 mm + 1 ejector pin Ø 6.35 mm x 77.0 mm for cutting depth 30.0 mm Article No. 108 304This text is machine translated.
RUKO 109015 Hole Punch Set
RUKO-109-015-5-Piece-Hole-Punch-Set-RUKO-109015-P-A-5-piece-set-of-sheet-metal-punches-from-RUKO-The-punches-cut-large-circular-holes-in-thin-materials-quickly-easily-cleanly-and-without-burrs-P-P-Simply-drill-a-suitable-pilot-hole-and-assemble-the-punch-with-one-part-of-the-punch-either-side-of-the-sheet-Tightening-the-central-draw-in-bolt-pulls-the-punch-through-the-sheet-to-produce-the-hole-P-RUKO-109015-Hole-Punch-Set
RUKO 109015 Sheetmetal punch set
Quickly creates mounting holes in aluminium plates and frames, casings, front panels and PCBs.
RUKO 109225 Sheetmetal punch 22.5 mm
With just a few simple steps thin-walled materials can be quickly, easily, cleanly and without burr. Particularly suitable for use with wrench, hand-held hydraulic punches or foot-operated hydraulic punches.Stamp: 3-point trim, material: Special steel,...
RUKO 109320 Sheetmetal punch 32 mm
With just a few simple steps thin-walled materials can be quickly, easily, cleanly and without burr. Particularly suitable for use with wrench, hand-held hydraulic punches or foot-operated hydraulic punches.Stamp: 3-point trim, material: Special steel,...
RUKO 109350K Sheetmetal punch 35 mm
With just a few simple steps thin-walled materials can be quickly, easily, cleanly and without burr. Particularly suitable for use with wrench, hand-held hydraulic punches or foot-operated hydraulic punches.Stamp: 3-point trim, material: Special steel,...