TinkerForge 111 HAT module Suitable for (single board PCs) TinkerForge 1 pc(s)
THE HAS Brick is a Raspberry Pi IN the standard HAS form factor. The brick is compliant with THE HAS specification and works automatically with Raspbian without any changes.With the, Brick can connect up to eight Bricklets to a Raspberry Pi.THE HAS Brick...
TinkerForge 18 TinkerForge 1 pc(s) Compatible with (development kits): TinkerForge
The IMU brick 2.0 is the successor of the IMU brick with high resolution sensors, simpler calibration, additional continuous self-calibration and a two orders of magnitude better accuracy.The IMU brick 2.0 is equipped with a 3-axis acceleration sensor,...
TinkerForge 2100 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
The Industrial Digital in 4 Bricklet 2.0 can be used to expand bricks with four digital inputs. The input voltage can be up to 36 volts (DC). The galvanic isolation of the inputs allows use without direct electrical connection, so that ground loops can...
TinkerForge 2102 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
The Industrial Quad Relay Bricklet 2.0 can be used to expand Bricks with four galvanically isolated solid state relays. Each relay can switch up to 1.2 amps at 30 volts. The isolation of the output allows use without a direct electrical connection, so...
TinkerForge 2103 LED module Suitable for (single board PCs) TinkerForge 1 pc(s)
The LED Strip Bricklet 2.0 can be used to control LED strips and LED pixels that are equipped with a WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 or APA102 (DotStar) LED driver. It is possible to control 2048 RGB or...
TinkerForge 2104 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
With the Load Cell Bricklet 2.0, Bricks can read load cells. Only one known weight is required for calibration of the load cell. It is possible to determine weight differences of a few grams between objects that weigh many kilograms themselves.On the...
TinkerForge 2105 Power/voltage/amp meter Suitable for (single board PCs) TinkerForge 1 pc(s)
With the Voltage/Current Bricklet 2.0, Bricks can be extended by the ability to measure power/voltage/current. The Bricklet is simply installed between power supply (e.g. battery) and load (e.g. motor).In battery-operated systems, two-way current measurement...
TinkerForge 2110 Fine dust detector Suitable for (single board PCs) TinkerForge 1 pc(s)
The Particulate Matter Bricklet can be used to extend the properties of a brick to include the ability to measure fine dust.The Bricklet supports the sizes PM1.0, PM2.5 and PM10. In addition, 2,5µm it is possible to measure the number of particles in...
TinkerForge 2114 I/O module Suitable for (single board PCs) TinkerForge 1 pc(s)
With the IO-16 Bricklet 2.0, bricks can be extended by external digital inputs and outputs (I/OS).The Bricklet has 2x 8 I/O channels that can be configured independantly as inputs or outputs. Each input can also be configured as a pull-up or interrupt...
TinkerForge 2116 Expansion board Suitable for (single board PCs) TinkerForge 1 pc(s)
The Industrial Analogue Out Bricklet 2.0 can be used to extend Bricks with a 12Bit digital-to-analogue converter. This can be used to generate coupled electrical voltages and currents. The voltage can be specified in mV and the current in µA.The Bricklet...