Murrelektronik 7000-08121-2300500 Sensor/actuator connector 5.00 m 1 pc(s)

Additional technical information: Design: 8121Core number/cross-section: 3× 0.25 mm²Drag chain values: 10 Mio.Wire insulation: PP (br, bl, sw)Bending radius (moving): 10× outer-ØTemperature range (flexible): -25...+80 °C.Cable identification 230Cable weight [g/m]: 26.40Material (conductor): Plain copper braidResistance (conductor): Max. 79 Ω/km (20 °C)Single wire Ø (conductor): 0.1 mmConstruction (conductor): 32× 0.1 mm (strand class 6)AWG: Similar AWG 24Material (core insulation): PPWire Ø incl. insulation: 1.25 mm ±5%Wire color/numbering: br, sw, blTwisted-strand network: 3 wires strandedShielding: no.Chemical resistance: Good resistance to oil, petrol and chemicals (EN 60811-404)Thermal resistance: Flame-resistant according to UL 1581 VW1 / CSA FT1 / IEC 60332-1, IEC 60332-2-2Test voltage: 2500 V/ACBending radius (fixed): 5× outer-ØNumber of bending cycles (drag chain): Max. 10 Mio (25 °C)Travel path (drag chain): Max. 10 m (horizontal)Travel speed (drag chain): Max. 3 m/s.Acceleration (drag chain): Max. 10 m/s²Dimensioning surge voltage: 0.8 kVLED display: Yellow/greenLocking the slots: Screw thread (M8×1 mm) recommended tightening torque 0.4 Nm, self-lockingMaterial (locking): Die-cast zinc, matt nickel-platedPollution level 3; Cable colour: Grey; Cable diameter: 4.1 mm; Cable length: 5.00 m; Connection side A (sensors/actuators): M8 socket, right angle; Connection side B (sensors/actuators): Cable, open end; Cross-section (sensor/actuator wiring): 0.25 mm²; IP rating: IP65, IP66K, IP67 (when connected); Jacket material: PUR; Max. temperature: +80 °C; Min. temperature: -40 °C; Nominal current: 4 A; Nominal voltage: 300 V AC; Outside diameter: 4.1 mm; Thread type (wiring and installation): M8

Price: £ 17.99 from Conrad Electronic